po-debconf (1.0.8) unstable; urgency=low * doc/po4a/po/fr.po: Update the French translation of the manpages. Thanks to Florentin Duneau. * debian/control: Move po4a from Build-Depends-Indep to Build-Depends because it is used in the clean rule. Also use a versioned dependency since we use the options introduced in po4a 0.23. -- Nicolas FRANCOIS (Nekral) Mon, 4 Dec 2006 23:03:44 +0100 po-debconf (1.0.7) unstable; urgency=low * podebconf-report-po: Document the --call and --potfile options in the --help output. Closes: #390933 * podebconf-report-po: Give some examples of headers in the template for --call (From, Subject (and Reply-To, if --bts is used)). * podebconf-report-po: Add a --utf8 option, to allow non-ascii characters in the mail body or headers. Headers are quoted-printable encoded to avoid rejection from some MTA. Closes: #292815 * podebconf-report-po: Propose to return to the editor before sending the mail. Closes: #388774 * podebconf-report-po: Add support for config files. Many --no* options were added to override configuration file settings. Closes: #388768 * podebconf-report-po: Invoke an editor, even with --template. The option to avoid opening an editor is --default. Closes: #388762 * podebconf-report-po: Document the format of emails in the man page. Closes: #388775 * Update the French translation of the manpages. Thanks to Florentin Duneau. -- Nicolas FRANCOIS (Nekral) Wed, 4 Oct 2006 19:27:07 +0200 po-debconf (1.0.6) unstable; urgency=low * New maintainer. * podebconf-display-po: Fix another issue when a string appears multiple times. Closes: #380007 * podebconf-report-po: Add a --langs option, to restrict the languages notified. Also permit to change the addresses and the list of notified languages in interactive mode with the editor. Closes: #380342 * podebconf-report-po: Add the --call and --potfile options for sending call for translations. Closes: #380343 -- Nicolas FRANCOIS (Nekral) Sun, 1 Oct 2006 00:12:25 +0200 po-debconf (1.0.5) unstable; urgency=low * podebconf-display-po: Changes introduced in 1.0.3 broke podebconf-display-po when a string appears in multiple files, Thanks Florentin Duneau. Closes: #375656 -- Denis Barbier Tue, 27 Jun 2006 19:30:35 +0200 po-debconf (1.0.4) unstable; urgency=low * doc/po4a/po/ru.po: Russian translation of podebconf-report-po documentation updated by Yuri Kozlov, thanks. -- Denis Barbier Mon, 26 Jun 2006 21:05:37 +0200 po-debconf (1.0.3) unstable; urgency=low * podebconf-display-po: Display a Select question even if there is only one translatable Choices field. Report and patch by Thomas Huriaux, thanks. Closes: #368984 * podebconf-display-po: Use File::Temp::tempfile() so that temporary files are not created in the current directory, so that this program can be run from a nn-writable directory. Suggested by Florentin Duneau, thanks. * debian/control: Move po4a from Build-Depends-Indep to Build-Depends because it is called by the 'clean' target. * podebconf-display-po: Handle multiple references in PO files. Closes: #361670. Thanks Yuri Kozlov and Thomas Huriaux. * podebconf-display-po: With intltool-debian 0.34.2+20060621, templates can be rebuilt even if fields appear after Description. Closes: #366227. Thanks Christian Perrier. * podebconf-report-po: Add a --summary option to send a mail to the maintainer with a list of mails sent to translators. Closes: #374077. Thanks Atsuhito KOHDA. -- Denis Barbier Sun, 25 Jun 2006 22:36:44 +0200 po-debconf (1.0.2) unstable; urgency=low * doc/en/po-debconf.7.pod: Proofread. Closes: #365622, #367128 * Update Russian translation of manual pages. Closes: #367388 Thanks to Yuri Kozlov. * Update French translation of manual pages. Closes: #368533 Thanks to Florentin Duneau. * debian/control: Bump Standards-Version: 3.7.2, no changes are needed. * debian/control: Bump dependency: intltool-debian (>= 0.34.2+20060512) to allow '*/' in comments. See #366450. -- Denis Barbier Mon, 22 May 2006 23:44:38 +0200 po-debconf (1.0.1) unstable; urgency=low * debconf-gettextize: Spaces were trimmed down when invoked with --merge --choices flags, and translations were thus fuzzy. Closes: #365576 Thanks Christian Perrier. * debian/control: Bump Standards-Version: 3.7.0, no changes are needed. * debian/control: As told by lintian, replace Build-Depends-Indep: debhelper by Build-Depends: debhelper because debhelper programs are run by the clean target. -- Denis Barbier Tue, 2 May 2006 23:57:35 +0200 po-debconf (1.0) unstable; urgency=low * debconf2pot: Drop this program, "debconf-updatepo --skip-merge" does the same job. * po2debconf: Do no more run debconf-updatepo if outdated PO files are detected. po-debconf(7) already explains why this was not a good idea. * debconf-gettextize: Cleanup, remove -l/-n/-o flags. * debconf-gettextize: Add a --choices flag to generate __Choices fields in the master template file. * debconf-gettextize: New --merge flag, to merge translations with existing PO files. * Depend on intltool-debian >= 0.34.1+20060220. With this version, comments in the form '#flag:' are interpreted by debconf-updatepo and po2debconf. They are helpful when a translatable field is composed of several strings. Recognized keywords are: - #flag:translate: Write only the specified strings into PO files. Closes: #330096 Thanks Colin Watson. - #flag:comment: Comments can be defined for each individual string. - #flag:partial This flag prints translated strings even if they are not fully translated. Closes: #230838 Thanks Christian Perrier. See details in po-debconf(7). * This version of intltool-debian also ensures that po2debconf properly removes comments when they appear at the top or bottom of template files, which should not occur though. * podebconf-display-po: Add support for Title type. Report and patch by Thomas Huriaux, thanks. Closes: #354583 * podebconf-report-po: Sort PO files. * Add Build-Depends-Indep: po4a. * Drop debian/README.Debian which was obsolete. * Update documentation. * Update Russian documentation. Thanks to Yuri Kozlov. (Closes: #353436) * Partial update of French documentation. -- Denis Barbier Wed, 15 Mar 2006 21:53:28 +0100 po-debconf (0.99.1) experimental; urgency=low * Update po-debconf(7) accordingly. -- Denis Barbier Fri, 27 Jan 2006 15:11:10 +0100 po-debconf (0.9.2) unstable; urgency=low * doc/po-debconf.7.pod: Improve the "Update templates" section to explain that debconf-updatepo needs to be run manually, or better called from the 'clean' target of debian/rules, so that PO files shipped in source packages are up-to-date. Closes: #338998 Thanks Thomas Huriaux. * doc/fr/po-debconf.fr.7.pod doc/ru/po-debconf.ru.7.pod: Update * podebconf-report-po: If package version number can be found in debian/changelog, put it into mail's subject so that translators can update their PO header field if they want to. Closes: #329546 Thanks Clytie Siddal and Christian Perrier. -- Denis Barbier Mon, 19 Dec 2005 10:23:51 +0100 po-debconf (0.9.1) unstable; urgency=low * Remove debconf2po-update.1, this program has been renamed three years ago, so the transition phase is over. * Add Russian man pages. Closes: #337750 Many thanks to Yuri Kozlov. * debian/control: Drop dependencies on libmime-base64-perl, this package had been merged with perl in sarge. -- Denis Barbier Thu, 8 Dec 2005 10:26:40 +0100 po-debconf (0.9.0) unstable; urgency=low * po2debconf: Default output encoding is now UTF-8, which means that if your package has a debian/po/output containing '2 utf8', you can remove this file and depends on 'po-debconf (>= 0.9.0)' to achieve the same result. * debconf-updatepo: Speed up merging PO files by calling msgmerge directly instead of intltool-update. * debconf-updatepo debconf2pot: Do no more modify templates.pot header comment. * debconf-updatepo: If a 'control' file is found in the parent directory of PO files. put its Maintainer field into the Report-Msgid-Bugs-To header field of templates.pot. Since po-debconf 0.7.0, this file is updated only when its content has changed (in order to prevent unneeded commits), so Report-Msgid-Bugs-To will be updated only when some msgids are modified. You can remove templates.pot before running debconf-updatepo if you want to add this field to all your PO files. Note also that this works only with intltool-debian >= 0.34.1+2005082. * po2debconf: Replace iconv by msgconv to recode PO files when encoding is set to 'popular'. * debian/control: Depends on gettext >= 0.12 because debconf-updatepo and po2debconf now rely on features added into this version. * podebconf-report-po: Document the --gzip flag in the --help output. Closes: #313280 * debian/control: Bump Standards-Version: 3.6.2 -- Denis Barbier Sun, 28 Aug 2005 22:34:35 +0200 po-debconf (0.8.23) unstable; urgency=low * podebconf-report-po: Fix PO header parsing when fields are splitted onto several lines. Closes: #302592 Thanks to Christian Perrier for reporting this bug. * podebconf-report-po: Add an X-Mail-Originator field containing the version number of this script; this may help debugging when problems arise. * podebconf-display-po: This script displays translated strings only if user's environment is localized. This restriction is added into the documentation. * podebconf-display-po: PO file has previously to be named .po; this restriction is removed, PO files can have any name. Closes: #301199 Thanks to Bart Carnelis for these suggestions. -- Denis Barbier Thu, 7 Apr 2005 23:11:06 +0200 po-debconf (0.8.22) unstable; urgency=low * podebconf-report-po: Add a --gzip flag to compress PO files. Thanks to Jure Cuhalev and Christian Perrier for this suggestion. Closes: #298599 * debian/control: Add Recommends: libcompress-zlib-perl needed by the --gzip flag. -- Denis Barbier Thu, 10 Mar 2005 11:51:26 +0100 po-debconf (0.8.21) unstable; urgency=low * podebconf-report-po: The fix for #292472 did not work as expected. Petter Reinholdtsen wrote a better patch, thanks. Closes: #296092 * podebconf-report-po: Fix detection of missing translator name. * podebconf-report-po: Fix parsing of mail header fields. Thanks Jan Outrata and Christian Perrier for reporting this bug. -- Denis Barbier Mon, 21 Feb 2005 21:47:28 +0100 po-debconf (0.8.20) unstable; urgency=low * debconf-updatepo debconf2pot po2debconf: Replace 'mv' calls by 'mv -f' so that po-debconf scripts can be run within fakechroot. Thanks Piotr Roszatycki for this suggestion. Closes: #293996 -- Denis Barbier Mon, 7 Feb 2005 21:57:30 +0100 po-debconf (0.8.19) unstable; urgency=low All these changes were performed by Fabio Tranchitella and Denis Barbier. * podebconf-report-po: If --from command line flag is not specified and environment variable DEBEMAIL is set, use this value as mail sender. Thanks Christian Perrier for this suggestion. Closes: #288532 * podebconf-report-po: Add --submit/--bts command line flags. The former file a bugreport, and the latter send usual notices to translators and inform them that they can send their translations to the given bugreport. Thanks again Christian Perrier for this suggestion. Closes: #288533 * podebconf-report-po: Mail headers can be modified when editing mail body, this is explained by comments on top of the body message. * podebconf-report-po: 8bit characters are replaced by question marks in mail headers. This does not fix #292815, but at least generated mails are no more invalid. * Put these changes into documentation. * debian/control: Lowercase the first letter of the short description. -- Denis Barbier Wed, 2 Feb 2005 22:48:12 +0100 po-debconf (0.8.18) unstable; urgency=low * podebconf-report-po: Missing translations were not detected, only fuzzy ones were taken into account. Thanks Drew Parsons for your report and Fabio Tranchitella for providing a fix. Closes: #292472 -- Denis Barbier Thu, 27 Jan 2005 22:04:56 +0100 po-debconf (0.8.17) unstable; urgency=low * podebconf-report-po: This script sent mails although translations are up-to-date if fuzzy marker appears in header field or in obsolete entries. This is fixed now, thanks Christian Perrier for finding this bug. -- Denis Barbier Wed, 29 Dec 2004 09:13:21 +0100 po-debconf (0.8.16) unstable; urgency=low * podebconf-report-po: Add a --languageteam flag to send carbon copies to Language Teams. Suggested by Christian Perrier and implemented by Fabio Tranchitella, thanks. Closes: #285665 -- Denis Barbier Fri, 24 Dec 2004 19:50:54 +0100 po-debconf (0.8.15) unstable; urgency=low * podebconf-report-po: This new script, written by Fabio Tranchitella, send mails to translators when their translations are outdated. Closes: #257125 Thanks Fabio. * debian/control: Add Recommends: libmail-sendmail-perl, libmime-base64-perl | perl (>= 5.8) to list Perl packages needed by this script. -- Denis Barbier Sat, 27 Nov 2004 14:25:26 +0100 po-debconf (0.8.14) unstable; urgency=low * README-trans: Major enhancements after comments by Jens Nachtigall, Erik Schanze and Dennis Stampfer. Closes: #270686, #273609 -- Denis Barbier Tue, 28 Sep 2004 23:36:16 +0200 po-debconf (0.8.13) unstable; urgency=low * debconf-updatepo: Add --skip-merge option. Thanks Christian Perrier for this suggestion. * debconf-updatepo: Add --skip-pot option and make this script less error prone by quoting variables. Thanks Branden Robinson for these changes. -- Denis Barbier Sat, 4 Sep 2004 15:04:51 +0200 po-debconf (0.8.12) unstable; urgency=low * encodings: Add new default encodings. Closes: #250917 Thanks Petter Reinholdtsen * po2debconf: Replace numbers by names when trap'ing signals. Closes: #256497 Thanks David Weinehall -- Denis Barbier Mon, 28 Jun 2004 23:29:33 +0200 po-debconf (0.8.11) unstable; urgency=low * po-debconf.7.pod: When debconf-updatepo is called in the build target, PO files are not updated in the source package. The right solution is to call it in the clean target. Thanks Martin Quinson. * Update French documentation. -- Denis Barbier Sun, 25 Apr 2004 21:44:23 +0200 po-debconf (0.8.10) unstable; urgency=low * po2debconf: An error in the cleanup() function prevented the removal of the no.po link. Closes: #237931 -- Denis Barbier Sun, 14 Mar 2004 15:05:11 +0100 po-debconf (0.8.9) unstable; urgency=low * debconf-gettextize: Fix a warning (uninitialized value) when translated templates have no Type fields. Closes: #234816 Thanks Martin Quinson * Bump dependency: intltool-debian (>= 0.30+20040211) to prevent generation of broken templates files if comments appear juste above a Template: line. * po2debconf: Make warning and error messages more coherent. Better handling of temporary files. * Official language code for Norwegian Bokmål is redefined from "no" to "nb". Petter Reinholdtsen asked on debian-edu@l.d.o. that po-debconf helps this transition; po2debconf now prints a warning if no.po exists (and generates Field-no localized fields), and when nb.po is found both -nb and -no localized fields are generated. Norwegian translators are thus encouraged to rename their no.po files into nb.po to provide the best support for users. Closes: #235756 * po2debconf.1: A note written by Petter Reinholdtsen about the above issue is added to documentation. French documentation is updated. -- Denis Barbier Sat, 6 Mar 2004 10:59:46 +0100 po-debconf (0.8.8) unstable; urgency=low * Fix typo in po-debconf(7), "#" is called "number sign", not "dash sign". Closes: #229964 Thanks Andreas Metzler -- Denis Barbier Sat, 7 Feb 2004 16:59:33 +0100 po-debconf (0.8.7) unstable; urgency=low * podebconf-display-po: C escapes were not removed from displayed strings. In order not to be bugged by stateful encodings, PO files are converted to UTF-8 with msgconv. If this program is not found, PO file encoding is untouched. -- Denis Barbier Tue, 18 Nov 2003 22:41:20 +0100 po-debconf (0.8.6) unstable; urgency=low * podebconf-display-po: Choices fields could not be displayed and made it abort. (Closes: Bug#218700) Thanks Christian Perrier -- Denis Barbier Mon, 3 Nov 2003 23:50:58 +0100 po-debconf (0.8.5) unstable; urgency=low * podebconf-display-po: Escape variable substitutions, replace all $ signs by ${dollarsign} and let debconf replace ${dollarsign} by $. * podebconf-display-po: Add a note in documentation telling that the whiptail frontend traps signals. (Closes: Bug#217987) Thanks Pierre Machard -- Denis Barbier Thu, 30 Oct 2003 22:28:26 +0100 po-debconf (0.8.4) unstable; urgency=low * podebconf-display-po: for the debian-installer, cdebconf does provide an "error" template type, it is converted to a note in order to be displayed by debconf. (Closes: Bug#217912) Thanks Pierre Machard -- Denis Barbier Wed, 29 Oct 2003 07:21:35 +0100 po-debconf (0.8.3) unstable; urgency=low * Depends on intltool-debian (>= 0.27.2+20031023) so that template type is added as a comment in PO files. Automatic comments in PO files previously looked like #. Comments extracted from source files #. Description and now #. Type: select #. Description #. Comments extracted from source files Author comments are the most important part, so put it near English text to catch translators' attention. * debconf-updatepo debconf2pot: Set INTLTOOL_DEBIAN_TYPE=po-debconf to print template type in PO files. * podebconf-display-po: New utility to launch a debconf interface based on templates found in a PO file. Translators can then check their translations before sending them. * doc/po-debconf.7.pod: Clarify how to mark Default fields as being translatable, previous version was somewhat incorrect. * doc/fr/po-debconf.7.fr.po: Translation update. -- Denis Barbier Fri, 24 Oct 2003 01:42:29 +0200 po-debconf (0.8.2) unstable; urgency=low * --name is a new command line flag of pod2man, so do not use it in doc/fr/Makefile until sarge is released. (Closes: Bug#214538) Thanks Martin Godisch -- Denis Barbier Tue, 7 Oct 2003 21:42:40 +0200 po-debconf (0.8.1) unstable; urgency=low * Fix incorrect Depends line (Closes: #214397). Thanks Aurelien Jarno -- Denis Barbier Mon, 6 Oct 2003 20:58:39 +0200 po-debconf (0.8.0) unstable; urgency=low * debconf-gettextize: Add a --unsafe flag to allow processing even if msguniq is missing. * debian/README.Debian: New file containing more detailed explanations about the above. Suggested by Andreas Metzler, thanks. * po-debconf(7): Update documentation to tell that comments can be inserted in templates files and copied into PO files. Thus add Depends: intltool-debian >= 0.27.2+20031003 to make sure that it does work as written in the documentation. Previous intltool-debian versions silently discard these comments, there is then no need to add a versioned build dependency against po-debconf when using this new feature. * Update French documentation. * po2debconf: Better error message when iconv fails * Bump Standards-Version: 3.6.1 (no changes needed) -- Denis Barbier Sun, 5 Oct 2003 00:28:01 +0200 po-debconf (0.7.3) unstable; urgency=low * Fix other typos in po-debconf(7). * Add French man pages, translated by Nicolas Bertolissio. -- Denis Barbier Wed, 17 Sep 2003 00:38:39 +0200 po-debconf (0.7.2) unstable; urgency=low * Fix typos in man pages. (Closes: #209013) Thanks Nicolas Bertolissio * Rename templates files under tests/ so that translators do not work on these test files. -- Denis Barbier Sun, 14 Sep 2003 22:07:00 +0200 po-debconf (0.7.1) unstable; urgency=low * debconf-gettextize: When an unknown language is found, a debian/po/.po.unknown file should be generated, as described in debconf-gettextize(1). But instead, this program did abort with a cryptic error message. (Closes: #202320) Thanks Christian Perrier -- Denis Barbier Mon, 21 Jul 2003 22:56:57 +0200 po-debconf (0.7.0) unstable; urgency=low * Hacked intltool scripts are now put in a separate package: intltool-debian * debian/control: Bump Standards-Version: 3.6.0 * debconf-updatepo: When only POT-Creation-Date has changed in templates.pot, this file is no more updated. * debconf-gettextize: Add Report-Msgid-Bugs-To in the POT header * debconf-gettextize: Final instructions now tell to edit debian/rules to generate the localized templates file. (Closes: #198867) Thanks Martin Quinson * po2debconf: If a PO file is older than the master templates file, debconf-updatepo is run before merging translations. This is to ensure that PO files in packages are up to date. -- Denis Barbier Mon, 21 Jul 2003 00:18:43 +0200 po-debconf (0.6.9) unstable; urgency=low * encodings: Set encoding of pt_BR to ISO-8859-1 instead of ISO-8859-15 (Closes: #187737) Thanks Andre Luis Lopez * debian/control: Remove versioned dependency against debhelper, it was unneeded. -- Denis Barbier Sat, 5 Apr 2003 20:53:25 +0200 po-debconf (0.6.8) unstable; urgency=low * po-debconf.7: As suggested by Adam Di Carlo, add a hint to run debconf-updatepo from debian/rules when templates file is edited. (Closes: #185886) * debconf-updatepo: debian/po/templates.pot was generated for each language, it is now generated only once. When --verbose flag is set, statistics are more readable. * debconf-updatepo: POT file will be renamed later into debian.pot because doc-base and other packages might want to use these tools. In order to provide backward compatibility, if debian.pot does exist, it is updated; otherwise templates.pot is used. -- Denis Barbier Sun, 23 Mar 2003 22:06:11 +0100 po-debconf (0.6.7) unstable; urgency=low * debian/control: Remove versioned dependency against gettext>=0.11. As msguniq is needed by debconf-gettextize, an error is reported if msguniq is not found. * encodings: Add 'en ISO-8859-1' -- Denis Barbier Mon, 17 Mar 2003 22:45:06 +0100 po-debconf (0.6.6) unstable; urgency=low * debconf-gettextize: When argument is named templates.in, strings were not extracted into templates.pot because it is considered as a localized templates file; there is indeed no way to know that templates.xx is a translation of templates.in. An error is now reported and a message is printed explaining that master file must be renamed first. Thanks Agustin Martin Domingo for this suggestion. -- Denis Barbier Sat, 15 Mar 2003 00:16:25 +0100 po-debconf (0.6.5) unstable; urgency=low * po2debconf: When a language is not listed in the 'encodings' file, it was discarded. Get its encoding from the PO file instead. (Closes: #184623) Thanks Agustin Martin Domingo * encodings: Add 'eo ISO-8859-3' * intltool scripts: Upgrade to latest CVS. -- Denis Barbier Thu, 13 Mar 2003 22:59:38 +0100 po-debconf (0.6.4) unstable; urgency=low * po2debconf: When applied to an already merged templates file, translations were dropped when language code contains an underscore. -- Denis Barbier Mon, 10 Mar 2003 01:12:05 +0100 po-debconf (0.6.3) unstable; urgency=low * po2debconf: Error messages reported by intltool-merge did appear in generated templates file because intltool-merge sends its error messages to stdout; redirect them to stderr. A better solution is to fix intltool-* scripts, a bugreport has been sent to upstream. (Closes: #179347) Thanks Joey Hess -- Denis Barbier Sat, 1 Feb 2003 21:29:49 +0100 po-debconf (0.6.2) unstable; urgency=low * debconf2pot debconf-updatepo po2debconf: LC_CTYPE must also be unset to work around Perl new behavior wrt. UTF-8 locales. Thanks Jerome Marant. -- Denis Barbier Mon, 20 Jan 2003 23:08:28 +0100 po-debconf (0.6.1) unstable; urgency=low * debconf2pot debconf-updatepo: An extra space was added after newlines when lines are not reformatted. -- Denis Barbier Thu, 19 Dec 2002 00:45:48 +0100 po-debconf (0.6.0) unstable; urgency=low * Internal change: In order to prepare doc-base support, intltool-merge now adds encoding in localized fields, and po2debconf removes them when output format < 2. * When field value is a comma separated list, an extra leading underscore tells po-debconf that items have to be put in separate msgids. This is a new localized field format, there is no reason to convert all _Choices field to __Choices, but if their value changes quite often, it may ease translator's life. (Closes: Bug#171649) * po2debconf: Fix a bug when dealing with extra text used to make msgids unique, it was removed too early. -- Denis Barbier Fri, 13 Dec 2002 23:24:32 +0100 po-debconf (0.5.4) unstable; urgency=low * Remove dependency against perl >= 5.8. Adrian Bunk pointed out that File::Spec is shipped in woody, and debconf-gettextize has been slightly changed not to require Perl 5.8 at all. But gettext 0.11 is still needed by debconf-gettextize. * po2debconf: sort intltool-merge command line flags. * encodings: ro charset is assumed to be ISO-8859-2 instead of ISO-8859-16. Thanks to Bela, who translated adduser template. * intltool scripts: upgrade to latest CVS. * RFC822 files can now have a tab at first column, it is treated as a normal space; this is intended for doc-base support. * --name is a new command line flag of pod2man, so do not use it in doc/Makefile until sarge is released. (Closes: Bug#172071) Thanks Petter Reinholdtsen * Fix typos in po-debconf(7) (Closes: Bug#171803) Thanks Jordi Mallach -- Denis Barbier Sat, 7 Dec 2002 13:25:55 +0100 po-debconf (0.5.3) unstable; urgency=low * debconf-gettextize: duplicated messages were deleted, now they are taken into account with the first translation encountered. -- Denis Barbier Sun, 24 Nov 2002 22:38:33 +0100 po-debconf (0.5.2) unstable; urgency=low Martin Quinson: * Rename debconf2po-update into debconf-updatepo. A soft link is provided to ease transition. * The README file has been rewritten, and put in po-debconf(7) -- Denis Barbier Tue, 12 Nov 2002 23:54:33 +0100 po-debconf (0.5.1) unstable; urgency=low * debconf2po-update: Abort when templates.pot file is not created, and remove some superfluous output. (Closes: Bug#166112, #166114, #166115) Thanks Branden Robinson. * debconf-gettextize debconf2po-update debconf2pot: Make header text more descriptive in POT and PO files. * debconf2pot: Fix for multiple input files. * debconf2po-update: When there are no *.po files, do not abort but call debconf2pot in order to generate templates.pot. * intltool-extract: Remove warning about multiply defined msgids. * When locale is set to UTF-8, Perl reads and writes UTF-8 data, and there seems to be no way to make it read bytes instead of chars. For this reason, LANGUAGE, LANG and LC_ALL environment variables are unset. Thanks Martin Sjogren. -- Denis Barbier Tue, 29 Oct 2002 22:38:48 +0100 po-debconf (0.5.0) unstable; urgency=low * po2debconf: + Replace --encoding=traditional by --encoding=popular. + Default output value is set to 2, which means that Description-de.ISO-8859-1 or Choices-ru.KOI8-R fields are printed instead of Description-de and Choices-ru. + When po or UTF-8 encoding is used, always set output value to 2. (Closes: Bug#163597) Thanks Tomohiro Kubota. + Format may also be specified in debian/output file, e.g. echo '2 utf8' > po/output * debconf2po-update: POTFILES.in was searched in directories po:debian/po:../po in that order, and now in debian/po:po:../po * Update intltool scripts with latest CVS * intltool-extract: In PO and POT files, sentences in a multi-paragraph string were not displayed in input order. -- Denis Barbier Tue, 8 Oct 2002 22:11:28 +0200 po-debconf (0.4.7) unstable; urgency=low * Remove dependency against GNU libc, since this is a required package and all ports use it. -- Denis Barbier Sun, 6 Oct 2002 20:42:36 +0200 po-debconf (0.4.6) unstable; urgency=low * Replace Depends: libc6 by libc6|libc6.1|libc0.3 in debian/control. so that po-debconf is installable on alpha, ia64 and hurd-i386. (Closes: Bug#163507) Thanks Ryan Murray. -- Denis Barbier Sun, 6 Oct 2002 18:55:57 +0200 po-debconf (0.4.5) unstable; urgency=low * README: Improve documentation. * debconf-gettextize: Minor change in output message. -- Denis Barbier Sat, 5 Oct 2002 17:07:57 +0200 po-debconf (0.4.4) unstable; urgency=low * debconf-gettextize: When there are multiple input files, some messages could be multiply defined. Thus msguniq is called to remove duplicates (shipped with gettext >= 0.11). * debconf-gettextize: Fuzzy entries were marked with '#. fuzzy' instead of '#, fuzzy'. PO files generated by previous versions should be manually checked to perform this substitution. -- Denis Barbier Fri, 4 Oct 2002 22:08:36 +0200 po-debconf (0.4.3) unstable; urgency=low * po2debconf: Text::Wrap was producing wrong output with some master templates files because $Text::Wrap::break had an incorrect value in /usr/share/po-debconf/intltool-merge (Closes: Bug#163160) Thanks Joey Hess. -- Denis Barbier Thu, 3 Oct 2002 19:17:45 +0200 po-debconf (0.4.2) unstable; urgency=low * Upload to *unstable* since there has been no bug reported since 0.4.0, and po-debconf seems now quite mature. * debconf2pot: Without argument, default input file is templates and not _templates. * Various doc fixes. -- Denis Barbier Tue, 1 Oct 2002 21:21:38 +0200 po-debconf (0.4.1) experimental; urgency=low * debconf-gettextize: It was broken when arguments are in another directory. The File::Spec module is used in order to call the abs2rel method, which implies that po-debconf depends upon perl >= 5.8.0. Since debconf-gettextize is only run by developers, translators may backport po-debconf to woody. -- Denis Barbier Sat, 28 Sep 2002 21:03:47 +0200 po-debconf (0.4.0) experimental; urgency=low * Rename _templates into templates in order to help developers migrating to po-debconf format. (Closes: Bug#161372) Thanks Joey Hess. * debconf-gettextize: + Accept several master files as arguments, and thus -F flag is removed because it is useless. + Add short option for --lang and --new-templates. + The --lang flag can be set more than once to specify several languages. + Run debconf2po-update when finishing, unless -n flag is used. * po2debconf: + Replace -n, -u and -E flags by -e. This new option sets encoding conversion, arguments is taken amongst: po (no conversion), utf8 (convert to UTF-8) and traditional (convert to legacy encoding). The latter is the default until sarge is released, then default will be utf8. + -O flag is obsolete, output format may be changed by the debian/po/output file. Localized fields are written foo-xx, and foo-xx.enc if debian/po/output contain 2. When sarge is released, default will be 2 and backports only need to echo 1 > debian/po/output * Split man pages so that each program has its own one. * debian/control: Remove dependency against debhelper, in order to let debhelper depends upon po-debconf if dh_installdebconf needs to call po2debconf. Thus dh_installpodebconf is no more installed. * debconf-gettextize po2debconf: Prevent line break between spaces, because a wrapped line beginning with a space cannot be reformatted. This is a release candidate for moving away from experimental, next upload will go to unstable unless major changes are needed. -- Denis Barbier Sun, 22 Sep 2002 23:56:23 +0200 po-debconf (0.3.2) experimental; urgency=low * New README-trans file with instructions for translators. * po2debconf: As explained in README-trans, developers are encouraged to replace in their _templates files _Default by _DefaultChoice when template type is Select or Multiselect so that translators are warned they must not translate this string, but instead change its value taken from original Choices list. Thus po2debconf must revert this change, since debconf does not recognize this field. * intltool-extract: Fix line numbers * debconf2pot: Add comments in POT file * debconf-gettextize: Change default PO directory, it is now `dirname $1`/po * debconf2po-update: search PO directory in ./po, debian/po and ../po -- Denis Barbier Sat, 21 Sep 2002 00:42:23 +0200 po-debconf (0.3.1) experimental; urgency=low * intltool-extract intltool-merge: When reformatting paragraphs, replace newline by a space, even if last char was already a space char. Then a space char is no more gobbled when a final dot appears at end of line. On the other hand, spacing is now wrong if there was extra trailing whitespace characters, but there is no universal solution, so do not try to fix broken input. * encodings: Update, thanks to Tomohiro Kubota. * po2debconf: Change default PO directory, it is now `dirname $1`/po so that po2debconf can be called from any directory. (Closes: Bug#161371) Thanks Joey Hess. * debconf-gettextize: If a language has no predefined encoding, rename PO file into ll.po.unknown in order not to break further processing. (Closes: Bug#161373) Thanks Joey Hess. -- Denis Barbier Thu, 19 Sep 2002 01:50:25 +0200 po-debconf (0.3.0) experimental; urgency=low * po2debconf: print text in the new Field-ll_LL.ENCODING format introduced by debconf 1.2.0. Old format is still available with the -O flag. * po2debconf: -u is the default, and -n prevents conversion to UTF-8 * debconf-gettextize: automatically determine charset of PO files * debconf-gettextize: accept new debconf format in input files. Of course all these new features are highly experimental and not well tested. * debconf-gettextize: do not print localized fields in _templates files -- Denis Barbier Tue, 17 Sep 2002 22:09:18 +0200 po-debconf (0.2.4) experimental; urgency=low * Martin Sjogren asked being able to transform his UTF-8 templates files into legacy encoding in order to be used by debconf. This is achieved with -E flag of po2debconf. (Closes: #161041) * Fix debconf-gettextize usage, it only accepts a single master file. -- Denis Barbier Mon, 16 Sep 2002 22:32:48 +0200 po-debconf (0.2.3) experimental; urgency=low * Replace 'Encoding: utf-8' by 'Encoding: UTF-8', since this is the canonical name in glibc. * Add a README file. -- Denis Barbier Sat, 14 Sep 2002 19:02:35 +0200 po-debconf (0.2.2) experimental; urgency=low * update intltool scripts for latest CVS. * As suggested by Joey Hess, po2debconf supports a new --utf8 flag which adds a 'Encoding: utf-8' line and convert all strings into utf-8. * Add a dependency against libc6 because iconv is needed by this new flag. -- Denis Barbier Wed, 11 Sep 2002 20:08:31 +0200 po-debconf (0.2.1) experimental; urgency=low * Oops, /usr/share/po-debconf/intltool-* scripts were missing. * Converted to native Debian package. -- Denis Barbier Wed, 11 Sep 2002 00:34:08 +0200 po-debconf (0.2.0-1) experimental; urgency=low * Uploads to experimental, procedures for l10n have currently been tested by few people only, some feedback from other translators is welcome before uploading to unstable. (Closes: Bug#160284) * Initial release -- Denis Barbier Wed, 11 Sep 2002 00:06:37 +0200